Air flow through compressed and uncompressed aluminum foam : Measurements and correlations

Dukhan, Nihad; Picon-Feiciano, Ruben; Alvarez-Hernandez, Angel R.. Journal of fluids engineering. (128(5), 2006, 1004-1012)

Characterization of aluminum foam–polypropylene interpenetrating phase composites: Flexural test results

Dukhan, Nihad, Rayess, Nassif; Hadley, James. Mechanics of Materials. (42(2), February 2010, 134-141)

Convective heat transfer from castings of ice roughened surfaces in horizontal flight

Dukhan, Nihad. (National Aeronautics and Space Administration, 1995)

NASA Technical Memorandum 107109

Correlations for the pressure drop for flow through metal foam

Dukhan, N.. Experiments inFluids. (41(4), 2006, 665-672)

Developing Nonthermal-Equilibrium Convection in Porous Media With Negligible Fluid Conduction

Dukhan, Nihad. Journal of Heat Transfer. (131(1), 2009, 01450.3–014501.1)

Effect of Confining Wall on Properties of Gas Flow Through Metal Foam: An Experimental Study

Dukhan, Nihad; Ali, Mohamed. Transport in Porous Media. (91(1), January 2012, 225-237)

Effect of sample's length on flow properties of open-cell metal foam and pressure-drop correlations

Dukhan, Nihad; Patel, Krunal. Journal of Porous Materials. (18(6), December 2011, 655-665)

Equivalent particle diameter and length scale for pressure drop in porous metals

Dukhan, Nihad; Patel, Pragnesh. Experimental Thermal and Fluid Science. (32(5), April 2008, 1059-1067)

Experimental Frossling Numbers for Ice-Roughened NACA 0012 Airfoils

Dukhan, Niyhadl De Witt, Kenneth J.; Masiulaniec, K. C.; Van Fossen, G. James. Journal of Aircraft. (40(6), November-December 2003, 1161-1167)

Flow characteristics of multiple rows of jets expanding in a square duct at low Reynolds numbers

Dukhan, Nihad. (University of Toledo, 1991)

Master's thesis

Heat transfer analysis in metal foams with low-conductivity fluids

Dukhan, Nihad; Picon-Feiciano, Ruben; Alvarez-Hernandez, Angel R.. Journal of Heat Transfer. (128(8), 2006, 784-792)

Heat transfer measurements in metal foam subjected to constant heat flux

Dukhan, Nihad; Chen, Kuan-Chih. Experimental Thermal and Fluid Science. (32(2), November 2007, 624-631)

Implementation of service-learning in engineering and its impact on students’ attitudes and identity

Dukhan, N.; Schumack, M. R.; Daniels, J. J.. European Journal of Engineering Education. (33(1), 2008, 21-31)

Measurements of the convective heat transfer coefficient from ice roughened surfaces in parallel and accelerated flows

Dukhan, Nihad. (University of Toledo, 1996)

Dissertation

New Forms of Calligraphy in Art & Architecture

Bittar, Doris; Oweis, Fayeq; Dukhan, Nihad. (Arab American National Museum)

Disc 3 of the set: Diwan: a forum for the arts 1, March 31 - April 1, 2006. Part E           

One-dimensional heat transfer analysis in open-cell 10-ppi metal foam

Dukhan, Nihad; Quiñones-Ramos, Pablo D.; Cruz-Ruiz, Edmundo; et al.. International Journal of Heat and Mass Transfer. (48(25-26), December 2005, 5112-5120)

One-Dimensional Model for the Combined Heat Transfer in Open-Cell Metal Foam

Dukhan, Nihad; Quinones, Pablo D.; Briano, Carolina; Fontanez, Jessica. ICHMT. (2, 2004, 183-189)

Service-learning case study in heat transfer

International Journal for Service Learning. (2(1), Spring, 2007, 1-15)

Service learning as pedagogy for promoting social awareness of mechanical engineering students

Dukhan, N.; Schumack, R.; Daniels, J.J.. International Journal of Mechanical Engineering Education,. (37(1), January 2009, 78-86)

Strong wall and transverse size effects on pressure drop of flow through open-cell metal foam

Dukhan, Nihad; Ali, Mohamed. International Journal of Thermal Sciences. (57, July 2012, 85-91)

Strong wall and transverse size effects on pressure drop of flow through open-cell metal foam

Dukhan, Nihad; Ali, Mohamed. International Journal of Thermal Sciences. (57, July 2012, 85-91)

Two-permeability approach for assessing flow properties in metal foam

Dukhan, Nihad; Minjeur, Carel A.. Journal of Porous Materials. (18(4), 2011, 417-424)